If you need to know about batteries; you’ve come to the right place
Chinese flag点击这里访问我们的中文网站Chinese flag

New industrial mixer from Ross

Thu, 01/17/2013 - 17:36 -- Ruth Williams

Industrial mixer manufacturer Ross has brought out a new model for industrial pastes, gels, suspensions, slurries and other viscous dispersions. 

CDA-30C

The Model CDA-30C is a portable dual shaft mixer with a working capacity of 30 to 100 litres.

It uses an air/oil hydraulic lift to raise and lower the agitators, a 3HP two-wing anchor and a 5HP high-speed disperser. Each agitator is independently controlled so the system is extremely versatile in terms of fine-tuning shear levels and flow patterns over a wide viscosity range.

The vacuum-rated mix can of the portable dual shaft mixer is jacketed for heating and cooling purposes. To ensure superior heat transfer, hinged Teflon scrapers are attached to the wings of the anchor agitator for wiping the sidewalls and cone-shaped vessel bottom.

A Type J thermoprobe, installed on the mixer cover, extends to the centre of the batch for highly accurate temperature monitoring. Temperature, speeds, vacuum level and other readouts are located in the NEMA 4X Purged Operator Control Panel. The CDA-30C is mounted on a stainless steel support frame with locking casters designed for complete portability and stability when in use.