CAM has developed VoltCure, a fully electric alternative to its gas-fired SteamCure line for battery plate curing applications.
Temperature, relative humidity and thermal stability are critical to plate curing chemistry and the formation of the required crystal structure. CAM’s existing SteamCure technology remains the benchmark for plants with direct access to stable, readily available and low-cost natural gas. However, volatile fuel tariffs, emissions constraints and supply uncertainty have created challenges for producers seeking greater control over curing costs.
VoltCure is designed to address these conditions without changing the chemical or physical process inside the curing chamber. The principal difference is the method used to generate and regulate thermal energy. The development expands CAM’s curing portfolio rather than replacing its existing SteamCure technology, providing battery manufacturers with an electric thermal option while retaining the established curing process.
“Natural gas exposes battery plants to external price shocks that management simply cannot control. VoltCure was engineered to restore cost certainty. By shifting to electric curing, manufacturers decouple their curing OPEX from global fossil fuel volatility. For facilities with proprietary on-site energy generation, curing cost per batch shifts from an unpredictable variable into a completely controlled, stable metric,” Ing. Francesco Marfisi, Technical Sales Director at CAM S.r.l. told BEST.
Technical Highlights: The Engineering Behind VoltCure
- Process Continuity via Horizontal Laminar Flow: The true core advantage of CAM curing chambers – shared by both SteamCure and the new VoltCure – lies in the horizontal laminar airflow system combined with direct steam injection. By driving a controlled, uniform horizontal draft across every rack level, thermal stratification and moisture stagnation is eliminated. This allows complete metallurgical consistency across 100% of the active mass, regardless of whether the customer cures vertical automotive plates or horizontal industrial grids. The curing cycle physics and steam-driven humidity generation remain identical; only the thermal vector changes.
- Pure Electric Thermal Generation: Thermal power is generated entirely through high-precision electric elements, completely eliminating burners, gas headers, and exhaust flues.
- Degree-by-Degree Precision: Tight digital temperature control from ambient up to 100°C without the cycling spikes or localised hot spots typical of combustion chambers.
- Zero Gas Infrastructure: Plants avoid overhead piping manifolds, complex ATEX ventilation zones, and roof penetrations for chimneys. Installation requires only sizing the copper power cable to the main electrical cabinet.
- Energy Sovereignty & Cost Predictability: Natural gas prices are governed by volatile geopolitical and financial markets that no plant manager can control. Shifting to an electric thermal vector allows battery producers to break free from this volatility, especially when paired with on-site captive power generation (such as rooftop solar or co-generation assets). In this scenario, curing energy becomes an internally controlled, mathematically predictable cost per ton of plates.
Commenting on the engineering rationale and airflow architecture, Mandini said: “Plate curing is dictated by fluid dynamics and chemistry, not marketing claims. The signature of CAM chambers has always been our horizontal laminar airflow combined with direct steam generation, which ensures every single plate – horizontal or vertical – undergoes the exact same thermal and humidity cycle. With VoltCure, we kept that proven aerodynamic and metallurgical engine intact. What we changed is the thermal vector: we replaced the gas burner with pure electric precision. The metallurgy remains uncompromising; the installation and energy sourcing become significantly simpler.”
The first industrial VoltCure unit is currently being assembled at CAM. The company plans to conduct its initial mechanical start-up and full thermal validation cycles in November 2026.
Mandini added: “This is real industrial machinery on our shop floor, not a digital concept. The first VoltCure production unit is currently in assembly, with full mechanical startup and empirical thermal profiling scheduled for this November. We look forward to sharing our commissioning data with the industry.”
Images: From the workshop floor – setting up VoltCure. Credit: CAM.


