Construction of a US solid-state lithium-ion battery pilot line and learning center is being built by additive manufacturing company Sakuu Corporation.
The US firm’s (previously named KeraCel) pilot line will be able to produce up to 2.5MWh of solid-state batteries per year and serve as a customer learning center for its advanced additive manufacturing platform.
The facility is due to be operational by end of 2021.
Sakuú is aiming to produce solid-state batteries that are up to 50% smaller and 30% lighter than lithium-ion batteries, although the firm didn’t give any figures to back up that promise.
The pilot line will test the viability of the battery manufacturing process and enable Sakuú to deliver sample products to its “early access strategic partners”.
The second phase is expected next year and will use an array of Sakuú AM Platforms to produce up to 1GWh of solid-state battery capacity per year.
Sakuú is working with Relevant Industrial and Honeywell Process Solutions to design and develop the facility by scaling-up the laboratory environment into a fully functioning pilot manufacturing plant.
Relevant and Honeywell will provide engineering, process design, systems integration, and process manufacturing expertise to efficiently build the factory.
Robert Bagheri CEO and founder of Sakuú, said: “This is an important milestone for us. Our technology development has progressed to the level where we have decided to move ahead with our plan to construct and operate a pilot facility.
“This facility will enable us to provide our strategic customers and early access partners with solid-state batteries for their own development and testing."
New cell developed
Last month, Sakuu announced it has developed a 3Ah lithium-metal solid-state battery (SSB).
Sakuú has been developing its first generation battery technology alongside its additive manufacturing platform, and aims for commercial launch by the end of this year.
The first-generation batteries comprise 30 sub-cells and a proprietary printed ceramic separator.
The battery will be targeted to consumer, aerospace, mobility, and other applications.
Bagheri said: “Over the last year, we have improved our battery energy capacity by a factor of 100 and our volumetric energy efficiency over 12 times and are planning to begin volume production of the batteries in early 2022 to meet the needs of our strategic partners."
In June, the California-based firm won approval of three patents: a hybrid solid-state cell with a sealed anode structure; an additive manufacturing system; and an electrophotographic multi-material 3D printer.
This latest patent is for a monolithic ceramic electrochemical cell housing an anode and cathode receptive space, alongside a separator between the two— allowing for higher charging rates without the risk to safety posed by lithium-ion batteries.
This is in addition to two previous battery patents for an integrated cell stack battery and monolithic solid-state battery, which were granted back in 2020.
The second patent for a three-dimensional AM system, allows for patterned single layers to be assembled into a three-dimensional active device onto an assembly plate. The patent includes a carrier substrate which allows for single layers to be built separately and then dispensed on a stack on the assembly plate.
The final patent is an electrophotographic three-dimensional printer system that can be used to create a 3D part derived from a composite toner material.
The new patent allows for the use of multiple engineering materials, such as ceramic, metal and polymer materials, which electrophotography was previously unable to employ.