Skip to Main Content

Search: lead

Lead

Barton pot process – β oxide results?

09 Feb 2023
Technical Article
Premium

Fig 1: New bespoke formation unit. The design is based on previous testing trials. It is the first prototype and will be the basic β prototype unit to be used to design and manufacture further units for field trials.

Lead

VRLA formation – reducing process time and energy consumption

09 Feb 2023
Battery Research
Premium

Lithium

Lithium-ion cells – cost vs quality

07 Feb 2023
Battery Research

Lithium

A safe and commercial solution to solid lithium-ion batteries

02 Feb 2023
Technical Article

Lithium

The A-B-C of cell grading and testing

09 Nov 2022
Technical Article

Typical BESS installation. Credit: Ørsted

Flow Battery

Choosing the right battery technology for your ESS

30 Aug 2022
Technical Article
Premium

Fig 1: Test laboratory facility, connector testing with Digatron test unit.

Lead

Latest battery formation programme saves manufacturers $millions per annum

30 Aug 2022
Technical Article
Premium

Fig 5: This is an example of a battery with inaccessible terminal posts, leaving the stainless steel hardware as the only access point for an ohmic measurement. Inter-cell connectors are completely insulated, making them as an alternate instrument test probe point impossible

Lead

Fundamentals of internal ohmic testing of stationary lead batteries

10 Aug 2022
Technical Article
Premium

Lithium

EV OEMs are betting on solid-state batteries— but will the gamble pay off?

05 Aug 2022
Technical Article
Premium

Fig 1: Pack Thermal gradient with forced air cooling (ref:semanticscholar.org)

Lithium

Essential battery characterisation methods for developing safer technologies

08 Jun 2022
Technical Article

Lead

Size matters: the basics of UPS battery sizing

31 May 2022
Industry Insight
Premium

Lead

Seeing the wood for the trees: expanding the performance indicators of lead batteries

01 Mar 2022
Technical Article

Commercial supercapacitors

Lead

The art of making highly conductive interfaces for batteries and supercapacitors

28 Feb 2022
Technical Article
Premium

This is an example of two temporary batteries used in the field during testing operations. Each is 120 volts but can be configured as a single 240 volt system when needed. Certain site circumstances require such a battery be connected to the dc system while the battery being tested is out of service to cover the need for backup power. The VRLA battery set in a utility trailer, along with the needed charger, switchgear and cabling is pretty common in the electric utility industry.

Lead

Battery capacity testing: what it is, how it works, and why you should be doing it

25 Feb 2022
Industry Insight

Lead

Monitoring the pulse

10 Feb 2022
Technical Article
Premium

Lead

Lead-acid battery formation testing

10 Feb 2022
Battery Research

Page 3 of 11

UK Powertech